$55.00
Picture yourself at the top of the fortresses tower. Looking out over a vast land. Your halls are covered in beautiful patterns and carvings. Mirroring those patterns is the armour dawned by your guards. These earrings were designed to be reminiscent of the ornamentation that adorned ancient shields. At their centre is a glossy black inlay which offsets the richness of the brasses golden hue giving the earrings a very classy appeal.
These earrings are approximately 2.2 x 1.8 cm(.86 x .71 inches) and are made of brass.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item. The brass is made from pure copper and zinc and has had a patina added to each component to give it an antiqued appearance. The ear hooks are surgical steel and come with rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
$44.00
These earrings are based on geometric tiles. They are 3.1 x 1.4 cm (1.2 x .55 inches) and made from pure copper.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$76.00
This dragon is our own design based on our studies of heraldic dragons. Since we are both personally interested in the lore and mythology of dragons...and because dragons may just be the number one requested image at our booth we wanted to make a special dragon together. The other inspiration behind this dragon was drawn from our multiple trips to Europe. Our intension with this design was to create a classy dragon that could be worn by any one who admires dragons. These earrings are made of pure copper and the unusual shape gives them an extra edginess. The glossy black inlay on the copper creates a very classy combination. You can wear these with a semi-casual attire or with a casual attire.
Please feel free to check out my blog about our dragon inspirations: http://www.paragonofdesignbyskrocki.com/blog
The earrings are about 3.9 x 2.2 cm or 3.9 x .87 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards. For upgraded shipping, which includes tracking and insurance up to $100, please check our supplies section.
These earrings are made to order and will take up to 10 business days to make.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$82.00
Inspired by a trip to Turkey this is based on a byzantine cross we encountered. The glossy black inlay contrasts with the golden tone of the brass to create a classy pendant. This pendant is versatile and can be worn daily. It fares well in both casual and semi-formal settings.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
The brass is made from pure copper and zinc and has had a patina added to each component to give it an antiqued appearance.
The size of this pendant is 5 x 3.2 cm or 2 x 1.2 inches.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$70.00
metal necklace geometric pendant, stained glassed design, gothic cathedral window, gold tone brass pendant, gothic necklaces
For those who love the architecture of nature and that which is created by humanity as we do this pendant is for you! We call it, affectionately, the Cathedral Flower as it was inspired by the architecture of many historic sites and by floral reliefs.
There are two sizes available:
Size:
1.8 x 1.8 inches
1.4 x 1.4 inches
Please note that real colors may slightly differ from their appearance on your display. They are often much more beautiful in person.
This pendant is completely made in our Edmonton, Alberta studio from start to finish. We start out with large sheets of metal and cut, add the images, shape, oxidize and color all the items ourselves. Because of this no two items are identical and can have slight variations between each item.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our custom made product card. Your item will be featured on one of our custom cards.
$60.00
These are inspired by viking knot work. The size of each copper earring is approximately 2.1 x 2 cm or .83 x .79 inches
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$80.00
Inspired by Eastern European filigree and ornamentation. This piece was designed to have a stained glass like appearance. The two tones of blue on the pure copper shield contrast beautifully. This piece is very striking in the direct light as the colours come alive when the sun shines upon them...similar to the way stained glass glows as the sun passes through it!
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
The pendant pictured above has been sold please contact me before ordering. This pendant could take up to two weeks to make.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 4.6 x 2.9 cm(1.8 x 1.1 inches)
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$88.00
A cult classic for us the Templar shield pendant is even more striking in person! We coated this, almost completely, in our custom inlay. The depth of the ruby red, gloss of the black, and sheen of the white light up magnificently in the sunlight. The piece was inspired by our numerous encounters with Templar imagery and historic sites. This is a versatile piece which can be worn to the office for a semi-causual look, for a night out with jeans and a t-shirt, or to your favourite rock show...or classical...or whatever it is you like! Tanner (my husband) has been wearing his for almost every occasion for years!
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The shield is curved and the length of the pendant is around 4.7 x 3.1 cm long or 1.85 x 1.2 inches.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$50.00
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
The size of each copper earring is approximately 2.1 x 1.6 cm or .82 x .63 inches.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$62.00
We visited Ephesus and the end of the ruins there was a small bazaar with a man selling replicas of the coinage used in the ancient city. On one side was the “honey bee” which was the symbol for the city for a number of reasons. One of them being that the goddess Artemis’ priestesses were called “bees” of the goddess.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 4.1 cm(1.6 inches).
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$50.00
Pure Copper and ruby red. What’s not to love! Befitting of Cleopatra’s jewelry box but made for yours. These Eye of Horus earrings are sure to catch the gaze of passers by. So go ahead. Stand out. Get noticed. We should mention this is the only pair we had time to make so far!
The History:
The Eye of Horus is an ancient Egyptian symbol of protection, royal power and good health.
The size of each copper earring is approximately 2.3 x 1.9 cm or .9 x .75 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
*http://en.wikipedia.org/wiki/Eye_of_Horus
$68.00
Striking in any light these beautiful earrings are sure to stun! The passing light on the rich ruby inlay and matte glow of the brass will bring them to life with every step. Inspired by all things ancient Egypt these earrings were designed to echo the majesty of the countries enchanting past. The subtly of the design gives an air of sophistication to the wearer. Pair them with pretty much any type of outfit to add just the right accent. We know you will love these as much as we do but we should mention...this is our only pair in this colour.
The size of each copper earring is approximately 3.2x 2.3 cm or 1.2 x .9 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These brass earrings have been made with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$78.00
Striking in any light this beautiful pendant is sure to stun! The passing light on the rich colours and matte glow of the brass brings it to life with every step. Inspired by all things ancient Egypt this pendant was designed to echo the majesty of the countries enchanting past. The subtly of the design gives an air of sophistication to the wearer. Pair this pendant with pretty much any type of outfit to add just the right accent. We know you will love these as much as we do but...this is our only one in this colour combination.
The size of this pendant is 4x3 cm (1.6 x 1.2 inches)
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
The brass is made from pure copper and zinc and has had a patina added to each component to give it an antiqued appearance.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$75.00
Striking in any light these beautiful earrings are sure to stun! The passing light on the rich complimentary colours (teal / pink / lavender) and matte glow of the copper will bring them to life with every step. Inspired by ancient Egyptian lotus motifs these earrings were designed to echo the majesty of the countries enchanting past. The subtly of the design gives an air of sophistication to the wearer. Pair them with pretty much any type of outfit to add just the right accent. We know you will love these as much as we do! This is the only pair we currently have in this shape and colours.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
The size of these earrings are 2.7 cm or 1.06 inches.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$57.00
These earrings are based on medieval tiles and are about 2.7 cm by 3 cm or 1 x 1.2 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$64.00
This pendant is based on medieval tiles found Christ Church Cathedral in Dublin Ireland. Please see my blog for more information.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 2.3 cm (.9 inches).
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards. For upgraded shipping, which includes tracking and insurance up to $100, please check our supplies section.
https://www.etsy.com/listing/224893493/upgraded-postage?ref=listing-shop-header-0
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
Matching earrings can be found here : https://www.etsy.com/listing/218582255/medieval-tile-fan-shaped-copper-earrings?ref=shop_home_active_3
$72.00
The colouring on this pure copper pendant is intense! The ruby red lights up as the light spills across it and is accented by the glossy black. This Mystic Spiral captures the arcane essence of historic Scandinavia and makes a striking accent for your daily attire! You can wear this pretty much wherever you want it looks great for a semi-casual or causal event...Everything from Casual Friday at work to the next rock show you take in!
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 4.6 x 3 cm. or 1.8 x1.2 inches.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$54.00
The design captures a historic vibe and beautiful tile quality while echoing the Maltese cross. This is classic Paragon of Design by Skrocki and a must have in one form or another. This set is made of copper and highlighted with ruby red and black. These earrings are versatile. They are beautiful. And we know you’ll be complimented when you wear them! Because they sell so quickly we have only this pair.
The size of each copper earring is approximately 1.9 cm or .75 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$48.00
This is our best seller! The design captures a historic vibe and beautiful tile quality while echoing the Maltese cross. This is classic Paragon of Design by Skrocki and a must have in one form or another. This pendant is made of copper and highlighted with ruby red and black. This pendant is versatile and designed for daily wear. Because they sell so quickly we have only this one.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 2.3 cm(.9 inches).
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$50.00
Inspired by extensive research. A rich mythological and cultural history. Multiple trips abroad. And a personal interest in the subject matter. These Tree of Life earrings are a crowd pleaser. Perhaps its the historical qualities or rich tones of the copper. Maybe its the vibrant hand painted colours. Or possibly the natural beauty of the tree that draws you in. We know the Tree of Life will fascinate you as much as it does us...oh and they go with pretty much everything! One of our best sellers its difficult to keep up with the demand. We thought we should mention...these are the only ones like this in stock currently!
The size of each copper piece is about 2.5 cm or 1 inch.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$58.00
This dragon is our own design based on our studies of heraldic dragons. Since we are both personally interested in the lore and mythology of dragons...and because dragons may just be the number one requested image at our booth we wanted to make a special dragon together. The other inspiration behind this dragon was drawn from our multiple trips to Europe. Our intention with this design was to create a classy dragon that could be worn by anyone who admires dragons. These earrings are made of pure copper. The red and black inlays on the copper are by far the most intense colour combination we make. In the natural light the red intensifies like fire engulfing the dragon! You can wear these with a semi-casual attire or with a casual attire.
They are about 2.4 x 2 cm or 1 x 0.75 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$73.00
This dragon is our own design based on our studies of heraldic dragons. Since we are both personally interested in the lore and mythology of dragons...and because dragons may just be the number one requested image at our booth we wanted to make a special dragon together. The other inspiration behind this dragon was drawn from our multiple trips to Europe. Our intension with this design was to create a classy dragon that could be worn by any one who admires dragons. These earrings are made of pure copper and the unusual shape gives them an extra edge. The red inlay on the copper is by far the most intense colour combination we make. In the natural light the red intensifies like fire engulfing the dragon! You can wear these with a semi-casual attire or with a casual attire.
Please feel free to check out my blog about our dragon inspirations on our blog.
They are about 3.9 x 2.2 cm or 1.5 x .87 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$70.00
This dragon is our own design based on our studies of heraldic dragons. Since we are both personally interested in the lore and mythology of dragons...and because dragons may just be the number one requested image at our booth we wanted to make a special dragon together. The other inspiration behind this dragon was drawn from our multiple trips to Europe. This pendant is made of pure copper and we decided to create an unusual shaping to give it further personality. You can wear this with a semi-casual attire or with a casual attire. The red inlay on the copper is by far the most intense colour combination we make. In the natural light the red intensifies like fire engulfing the dragon!
Please feel free to check out my blog about our dragon inspirations on our blog.
This pendant is about 4.6 x 2.7 cm or 1.8 x 1.0 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$68.00
This dragon is our own design based on our studies of heraldic dragons. Since we are both personally interested in the lore and mythology of dragons...and because dragons may just be the number one requested image at our booth we wanted to make a special dragon together. The other inspiration behind this dragon was drawn from our multiple trips to Europe. This pendant is made of pure copper and we decided to create an unusual shaping to give it further personality. You can wear this with a semi-casual attire or with a casual attire. The red inlay on the copper is by far the most intense colour combination we make. In the natural light the red intensifies like fire engulfing the dragon!
Please feel free to check out my blog about our dragon inspirations on our blog.
This pendant is about 4.2 x 2.6 cm or 1 5/8 x 1 1/16 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$70.00
This dragon is our own design based on our studies of heraldic dragons. Since we are both personally interested in the lore and mythology of dragons...and because dragons may just be the number one requested image at our booth we wanted to make a special dragon together. The other inspiration behind this dragon was drawn from our multiple trips to Europe. Our intension with this design was to create a classy dragon that could be worn by any one who admires dragons. These earrings are made of pure copper. The red inlay on the copper is by far the most intense colour combination we make. In the natural light the red intensifies like fire engulfing the dragon! You can wear these with a semi-casual attire or with a casual attire.
They are about 2.9 x 2.2 cm or 1.1 x .86 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$64.00
Based on a great artifact we encountered in the Orkney Islands this image is of a Viking dragon. We chose an unusual, but comfortable shaping for this piece to make it even more unique. We know you may have been having difficulty finding unconventional pendants and we wanted to make sure we paid attention to everything: the image, the shape and the colour. We have made a small series of different images, shapes and colours for you to choose from.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 3.5 x 2.6 cm or 1.4 x 1 inches.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$64.00
Based on a great artifact we encountered in the Orkney Islands this image is of a Viking dragon. The pure copper seems set ablaze when the sun ignites the ruby red inlay. The light draws the red tone of the copper back through the inlay making it even more intense. We thought this combination befitting of a warrior styled pendant. We chose an unusual, but comfortable shaping for this piece to make it even more unique. We know you may have been having difficulty finding unconventional pendants and we wanted to make sure we paid attention to everything: the image, the shape and the colour. We have made a small series of different images, shapes and colours for you to choose from.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 3.5 x 2.6 cm or 1.4 x 1 inches.
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards. For upgraded shipping, which includes tracking and insurance up to $100, please check our supplies section.
https://www.etsy.com/listing/224893493/upgraded-postage?ref=listing-shop-header-0
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$66.24
This listing is for a Seraphim pendant as discussed with Erin.
The colours are: black for the background and blue for the centre. It is made from Jewellers brass.
No pictures are available of the product but It is the exact pendant from the Edmonton Comic Expo.
This pendant is completely made in our Edmonton, Alberta studio from start to finish. We start out with large sheets of metal and cut, add the images, shape, oxidize and color all the items ourselves. Because of this no two items are identical and can have
Please note that real colors may slightly differ from their appearance on your display. They are often much more beautiful in person.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
$85.00
This listing is for a Seraphim pendant as discussed with Steven. This item is made to order. It will be made with our Seraphim design on the same shape as the Templar pendant in the picture. The colours will be: black for the background, white for the wings, and Amethyst for the centre. It will be made from Jewellers brass.
No pictures are available of the product so the templar pictures are being used as placeholders and to indicate the size and shape of the pendant being custom made.
This pendant is completely made in our Edmonton, Alberta studio from start to finish. We start out with large sheets of metal and cut, add the images, shape, oxidize and color all the items ourselves. Because of this no two items are identical and can have
Please note that real colors may slightly differ from their appearance on your display. They are often much more beautiful in person.
The shield is curved and the length of the pendant is around 4.6 x 2.7 cm long.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
$52.00
The depth of the ruby red, gloss of the black, and sheen of the white light up magnificently in the sunlight. The piece was inspired by our numerous encounters with Templar imagery and historic sites. This is a versatile piece which can be worn to the office for a semi-causual look, for a night out with jeans and a t-shirt, or to your favourite rock show...or classical...or whatever it is you like!
This pendant is completely made in our Edmonton, Alberta studio from start to finish. We start out with large sheets of metal and cut, add the images, shape, oxidize and color all the items ourselves. Because of this no two items are identical and can have slight variations between each item.
Please view our supplies section for our leather cord options.
Please note that real colors may slightly differ from their appearance on your display. They are often much more beautiful in person.
The shield is curved and the length of the pendant is around 3.2 x 3.2 cm long(1 2/8 x 1 2/8 inches).
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
$76.00
A cult classic for us the Templar shield pendant is even more striking in person! We coated this, almost completely, in our custom inlay. The depth of the ruby red, gloss of the black, and sheen of the white light up magnificently in the sunlight. The piece was inspired by our numerous encounters with Templar imagery and historic sites. This is a versatile piece which can be worn to the office for a semi-causual look, for a night out with jeans and a t-shirt, or to your favourite rock show...or classical...or whatever it is you like! Tanner (my husband) has been wearing his for almost every occasion for years!
This pendant is completely made in our Edmonton, Alberta studio from start to finish. We start out with large sheets of metal and cut, add the images, shape, oxidize and color all the items ourselves. Because of this no two items are identical and can have slight variations between each item.
Please view our supplies section for our leather cord options.
Please note that real colors may slightly differ from their appearance on your display. They are often much more beautiful in person.
The shield is curved and the length of the pendant is around 3. 4x 2.2 cm long(1 3/8 x 7/8 inches).
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item will be featured on one of our custom cards.
$76.00
A cult classic for us the Templar shield pendant is even more striking in person! We coated this, almost completely, in our custom inlay. The depth of the ruby red, gloss of the black, and sheen of the white light up magnificently in the sunlight. The piece was inspired by our numerous encounters with Templar imagery and historic sites. This is a versatile piece which can be worn to the office for a semi-causual look, for a night out with jeans and a t-shirt, or to your favourite rock show...or classical...or whatever it is you like!
This pendant is completely made in our Edmonton, Alberta studio from start to finish. We start out with large sheets of metal and cut, add the images, shape, oxidize and color all the items ourselves. Because of this no two items are identical and can have slight variations between each item.
Please view our supplies section for our leather cord options.
Please note that real colors may slightly differ from their appearance on your display. They are often much more beautiful in person.
The shield is curved and the length of the pendant is around 4.6 x 2.7 cm long(1 13/16 x 1 1/16 inches).
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
$52.00
Inspired by extensive research. A rich mythological and cultural history. Multiple trips abroad. And a personal interest in the subject matter. These Tree of Life earrings are a crowd pleaser. Perhaps its the historical qualities or rich tones of the copper. Maybe its the vibrant hand painted colours. Or possibly the natural beauty of the tree that draws you in. We know the Tree of Life will fascinate you as much as it does us...oh and they go with pretty much everything! One of our best sellers its difficult to keep up with the demand. We thought we should mention...these are the only green ones in stock currently!
These tree of life earrings are one of our smallest that we make measuring at 2.1 x 1.6 cm or .83 x .63 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$52.00
Easily the most requested knot work by our fans. Boasting a rich history and various interpretations. The Triquetra or Trinity Knot is as versatile a design as the earrings we beautified with it. Inspired by a face to face encounter with the Book of Kells itself. An adventurous trek through Ireland, the highlands and the former Scandinavia. As well as a life long interest in the varied history of the Celts.
Designed to have just the right amount of class and colour for your daily enjoyment. We know you will love the way the brass and black accent your outfits. Add this classic Celtic design to your collection as a go to piece. This is our only pair currently!
The size of each copper earring is approximately 2.2 cm or .86 inches.
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item. The brass is made from pure copper and zinc and has had a patina added to each component to give it an antiqued appearance. The ear hooks are surgical steel and come with rubber ear nubs.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$52.00
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
These copper earrings have been made with 99.99% pure copper with surgical steel ear hooks and rubber ear nubs.
The size of each copper earring is approximately 2.1 x 2 cm or .82 x .78 inches.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
$66.00
Imagine the ships slicing through the waters. Conquest underway those aboard are fierce honour bound warriors. Inspired by the dragons adorning the roof of old Stave churches in Norway this piece ties elements of different warriors together. The intensity of the red against the pure copper back drop in grows as the natural light spills across the piece. The shield shaping of this pendant is intended to further draw in the spirit of the era which inspired the piece. This is a versatile piece it is designed to be worn daily or for semi-causual events (ex: casual fridays).
Each metal component, made in our Alberta, Canada, studio, is the product of a rigorous 35-45 step process (around 35 per earring or pendant and between 40 and 45 per ring and cuff link). Starting with plain sheets of metal we design and create our components one at a time. Some of the key steps include preparing the metal and design work, etching the imagery and cutting custom shapes. Shaping is done with a manual hydraulic press (2000 lbs plus per a component) to create stronger, more durable and professionally shaped components. Each piece is finished with a meticulous hand applied coloring process wherein each color is individually applied and often on different days to allow for the lengthy drying process (up to 72 hours). The majority of the other steps revolve around an absurd amount of sanding and cleaning, as well as, adding the finishing touches such as ear hooks, jump rings, soldering etc. Because of this no two items are identical and they have variations between each item.
This copper pendant has been made with 99.99% pure copper.
The size of this pendant is 4.6 x 3 cm(1.8 x 1.2 inches)
Please see our supplies section to buy a cord.
Each item comes with a care card, authentication card, gift box and item card. The last picture shows what the packaging looks like complete with our in studio made product card. Your item (featured in the first picture) will be featured on one of our custom cards.
For upgraded shipping, tracking and insurance please contact us.
*Note because we are selling online at two different places and we are doing shows it may take the full 10 days for us to ship the item if we have to remake it. Because of this your item will look either almost the same or very close to what you see in the picture (more than likely you will receive the item in the picture above). If you need the item sooner please message us to see if the item is in stock.
Subscribe to our newsletter and always be the first to hear about what is happening.
© 2023 Six Wings by Skrocki Design
Designed by Out of the Sandbox. Powered by Shopify
#113, 13651, St Albert Trail, Unit 4, Edmonton, Alberta, Canada
1-780-289-4283